Precision Plus Breathalyser
Precision in name, Precision by design. With the most advanced detection sensor and the option to either use a mouthpiece or simply speak into the unit for a reading, this has been touted as the best in the industry.
Note: Breathalysers are calibrated on order. Please allow an additional 48 hours to postage time.
The AlcoSense Precision + Breathalyser is an Australian Standard Tested-Approved AS3547 state of the art instrument used to detect Ethyl Alcohol from a valid breath sample. It uses an electrochemical fuel cell to measure the concentration of alcohol from the exhaled human breath. If alcohol is present, a corresponding voltage is generated from the fuel cell, proportionate to the alcohol content of the sample provided. This voltage is then sent to the microcontroller to calculate and display a %BAC.
The AlcoSense Precision + has both direct and passive modes. In passive mode no mouthpiece is needed: the subject can simply speak or breathe into the mouthpiece slot to get an “Alcohol Detected” or “No Alcohol” reading. In direct mode you can attach a mouthpiece and obtain a highly accurate 3 decimal place readout.
It is the perfect tool of drug testing for workplaces, law enforcement, OH&S, schools, alcohol treatment, emergency rooms and medical professions in Australia.
Now with a large 2.4 inch TFT colour screen and clear onscreen instructions, the new AlcoSense Precision + offers advanced features in a simple-to-use breathalyser ideal for accurate workplace alcohol testing.
Provides exceptionally fast and accurate readings ranging from 0.000 to 0.400% BAC and reacts only to alcohol.
High accuracy, long term stability and sensor life makes it an ideal breathalyser for industrial use.
Australian Standard AS3547 Type 2 Quantitative CERTIFIED
|BAC Range||0.000% - 0.500%BAC|
|Sensor Type||Fuel Cell|
|Accuracy||±0.005%BAC at 0.100%BAC|
|Warm Up Time||Within 3 seconds|
|Response Time||Within 3 seconds|
|Recycle Time||5 seconds|
|Working Temperature||(-)5 – 40°C|
|Power Supply||4 x AAA Batteries (Alkaline Only)|
|Mouthpieces||5 mouthpieces supplied (please note this unit is only compatible with AlcoSense mouthpieces)|
|Result Reading||Normal Mode: 0.000 to 0.500%BAC|
|Fast Mode: “Alcohol Detected” or “No Alcohol”|
|Result readings can also be changed to the following BAC and BrAC formats. Please specify this at the time of purchase or during calibration:|
|0.000 ~ 4.000 ‰|
|0.000 ~ 0.400%BAC|
|0.000 ~ 2.000 mg/l BrAC|
|0.000 ~ 4.000 g/l|
|Certification||Australian Standard AS3547|
|Continuous Use||Over 500 tests|
|Calibration Frequency||Manufacturer recommended: 1000 tests/ 12 months; Australian Standards Requirement: 6 months|
|Display||2.4 inch TFT Colour Screen|
|Features||3 decimal place reading, flow control, auto power off, battery low indicator, passive/fast mode, test counter, designed for mass testing, calibration reminder, extreme temperature tolerance, PC compatible|